UNLOCK WARNING SWITCH INSTALLATION


  1. INSTALL UNLOCK WARNING SWITCH ASSEMBLY


    1. A01CGM3

      Attach the 2 claws and install the unlock warning switch assembly.

    2. Attach the clamp.

    3. Connect the connector.

    4. Connect the unlock warning switch assembly cable to the steering column assembly with a new cable tie.

    5. A01CHVIE02
      Text in Illustration
      *a Cut Here
      *b 5 mm (0.20 in.)
      *c Correct
      *d Incorrect

      Cut off the end of the cable tie as shown in the illustration.

  2. INSTALL IGNITION SWITCH LOCK CYLINDER


    1. A01CJDP

      Make sure that the ignition switch lock cylinder is in the ACC position.

    2. Install the ignition switch lock cylinder.

    3. Make sure that the ignition switch lock cylinder is securely installed.

  3. INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY

    Click here