UNLOCK WARNING SWITCH REMOVAL


  1. REMOVE HEADLIGHT DIMMER SWITCH ASSEMBLY

    Click here

  2. REMOVE IGNITION SWITCH LOCK CYLINDER


    1. A01CJG3

      Turn the ignition switch lock cylinder to the ACC position.

    2. Insert a screwdriver into the hole of the steering column upper with switch bracket assembly as shown in the illustration. Pull the ignition switch lock cylinder to remove it.

  3. REMOVE UNLOCK WARNING SWITCH ASSEMBLY


    1. A01CIKOE01
      Text in Illustration
      *1 Cable Tie

      Cut off the cable tie.

    2. Disconnect the connector.

    3. Detect the clamp.

    4. A01CIILE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, detach the 2 claws.

      Tech Tips

      Tape the screwdriver tip before use.

    5. A01CGUJE01
      Text in Illustration
      *1 Pin

      While pressing the pin, remove the unlock warning switch assembly.