FRONT WIPER RUBBER REPLACEMENT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. REMOVE FRONT WIPER BLADE LH


    1. A01CGZBE01
      Text in Illustration
      *1 Front Wiper Blade
      *2 Front Wiper Blade Holder
      *3 Front Wiper Arm

      Open the front wiper blade holder.

    2. Remove the front wiper blade LH from the front wiper arm as shown in the illustration.

      Note

      Do not bend the front wiper arm with the front wiper blade removed because the arm tip could damage the windshield surface.

  2. REMOVE WIPER RUBBER LH


    1. A01CITT

      Remove the wiper rubber LH and wiper rubber backing plates from the front wiper blade LH.

    2. A01CIDZ

      Remove the 2 wiper rubber backing plates from the wiper rubber LH.

  3. INSTALL WIPER RUBBER LH


    1. A01CHNWE05

      Install the wiper rubber backing plates as shown in the illustration.

      Note


      • Align the protrusions on the wiper rubber and the notches of the backing plates.

      • Align the curves of the backing plates and the glass.

      • Install the backing plates facing the correct direction.

        Text in Illustration
        *1 Rear Wiper Rubber Backing Plate
        *2 Rear Wiper Rubber LH
        *a Curve
    2. A01CIOW

      Install the wiper rubber LH to the front wiper blade LH as shown in the illustration.

      Note

      Push the wiper rubber into the wiper blade strongly to engage them securely.

  4. INSTALL FRONT WIPER BLADE LH


    1. A01CI5EE01
      Text in Illustration
      *1 Front Wiper Blade Holder

      Install the front wiper blade LH as shown in the illustration.