WIPER AND WASHER SYSTEM

Disconnect the N9 and N10 No. 1 integration relay connectors.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol)	Wiring Color	Terminal Description	Condition	Specified Condition
N9-1 (IG) - N10-4 (E)	R - W-B	Ignition power supply	Ignition switch off	Below 1 V
N9-1 (IG) - N10-4 (E)	R - W-B	Ignition power supply	Ignition switch ON	20 to 28 V
N10-6 (+B) - N10-4 (E)	G - W-B	Battery power supply	Always	20 to 28 V
N10-4 (E) - Body ground	W-B - Body ground	Ground	Always	Below 1 Ω

Reconnect the N9 and N10 No. 1 integration relay connectors.

Measure the voltage according to the value(s) in the table below.

Terminal No. (Symbol)	Wiring Color	Terminal Description	Condition	Specified Condition
N10-1 (WF) - Body ground	W - Body ground	Windshield washer motor and pump assembly operation signal	Ignition switch ON Windshield wiper switch assembly (washer switch) off	20 to 28 V
N10-1 (WF) - Body ground	W - Body ground	Windshield washer motor and pump assembly operation signal	Ignition switch ON Windshield wiper switch assembly (washer switch) on	Below 1 V
N10-2 (+2) - Body ground	L - Body ground	Front wiper motor and bracket assembly high speed operation signal	Ignition switch ON Windshield wiper switch assembly (wiper switch) off	Below 1 V
N10-2 (+2) - Body ground	L - Body ground	Front wiper motor and bracket assembly high speed operation signal	Ignition switch ON Windshield wiper switch assembly (wiper switch) in HI position	20 to 28 V
N10-5 (+1) - Body ground	V - Body ground	Front wiper motor and bracket assembly low speed operation signal	Ignition switch ON Windshield wiper switch assembly (wiper switch) off	Below 1 V
N10-5 (+1) - Body ground	V - Body ground	Front wiper motor and bracket assembly low speed operation signal	Ignition switch ON Windshield wiper switch assembly (wiper switch) in LO position	20 to 28 V
N9-6 (PA2) - Body ground	R - Body ground	Windshield wiper switch assembly HI position signal	Ignition switch ON Windshield wiper switch assembly (wiper switch) not in HI position	4.3 V or higher
N9-6 (PA2) - Body ground	R - Body ground	Windshield wiper switch assembly HI position signal	Ignition switch ON Windshield wiper switch assembly (wiper switch) in HI position	Below 1 V
N9-7 (PA1) - Body ground	LG - Body ground	Windshield wiper switch assembly LO position signal	Ignition switch ON Windshield wiper switch assembly (wiper switch) not in LO position	4.3 V or higher
N9-7 (PA1) - Body ground	LG - Body ground	Windshield wiper switch assembly LO position signal	Ignition switch ON Windshield wiper switch assembly (wiper switch) in LO position	Below 1 V
N9-8 (SPD) - Body ground	P - Body ground	Windshield wiper switch assembly INT position signal	Ignition switch ON Windshield wiper switch assembly (wiper switch) not in INT position	4.3 V or higher
N9-8 (SPD) - Body ground	P - Body ground	Windshield wiper switch assembly INT position signal	Ignition switch ON Windshield wiper switch assembly (wiper switch) in INT position	Below 1 V
N9-11 (+S) - Body ground	Y - Body ground	Front wiper motor and bracket assembly operation signal	Front wiper motor and bracket assembly operates	5.5 V or higher → Below 1 V
N9-11 (+S) - Body ground	Y - Body ground	Front wiper motor and bracket assembly operation signal	Front wiper motor and bracket assembly stops	Below 1 V
N9-12 (WU) - Body ground	SB - Body ground	Windshield wiper switch assembly (washer switch) signal	Ignition switch ON Windshield wiper switch assembly (washer switch) off	4.3 V or higher
N9-12 (WU) - Body ground	SB - Body ground	Windshield wiper switch assembly (washer switch) signal	Ignition switch ON Windshield wiper switch assembly (washer switch) on	Below 1 V

WIPER AND WASHER SYSTEM TERMINALS OF ECU