STOP LIGHT SWITCH INSPECTION


  1. INSPECT STOP LIGHT SWITCH ASSEMBLY

    A01CJBZE01
    Text in Illustration
    *a

    Component without harness connected

    (Stop Light Switch Assembly)
    *b Shaft pushed

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 - 2 Shaft released Below 1 Ω
      Shaft pushed 10 kΩ or higher

      If the result is not as specified, replace the stop light switch assembly.