ROOM LIGHT SWITCH INSPECTION


  1. INSPECT ROOM LIGHT SWITCH

    A01CIYNE01
    Text in Illustration
    *a

    Component without harness connected

    (Room Light Switch)

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      4 - 1 Room light switch off 10 kΩ or higher
      4 - 1 Room light switch on Below 1 Ω

      If the result is not as specified, replace the room light switch.

    2. A01CIYNE01
      Text in Illustration
      *a

      Component without harness connected

      (Room Light Switch)

      Apply battery voltage to the connector and check the illumination condition.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 8

      Battery negative (-) → Terminal 7

      		 Illuminates

      If the result is not as specified, replace the room light switch.