HEADLIGHT DIMMER SWITCH REMOVAL


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE SPIRAL CABLE SUB-ASSEMBLY

    Click here

  4. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY


    1. A01CHI9

      Disconnect the connector.

    2. Detach the claw and remove the windshield wiper switch assembly.

  5. REMOVE HEADLIGHT DIMMER SWITCH ASSEMBLY

    A01CITN

    1. Disconnect the connector.

    2. While loosening the band clamp, detach the claw and remove the headlight dimmer switch assembly.

      Note

      If the claw is pressed forcefully, it will break.