WASHER MOTOR INSTALLATION


  1. INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    1. Attach the claw to install the windshield washer motor and pump assembly.

  2. INSTALL WINDSHIELD WASHER JAR ASSEMBLY


    1. Install the windshield washer jar assembly with the 3 bolts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    2. Attach the clamp.

    3. Connect the connector and washer hose.

  3. INSTALL WASHER INLET SUB-ASSEMBLY


    1. Install the washer inlet sub-assembly.

  4. INSTALL FRONT WASHER TANK CAP


    1. Install the front washer tank cap.

  5. INSTALL NO. 1 INSTRUMENT PANEL BOX


    1. Attach the 2 wire harness clamps.

    2. Attach the 4 clips, claw and guide to install the No. 1 instrument panel box.

    3. Install the bolt <G>.

  6. INSTALL LOWER INSTRUMENT PANEL


    1. Attach the 8 clips to install the lower instrument panel.

    2. Install the 3 bolts <D>.

    3. Install the clip.

  7. INSTALL LOWER INSTRUMENT COVER


    1. Install the 4 clips to install the lower instrument cover.

  8. INSTALL INSTRUMENT PANEL BOX HOLDER


    1. Install the instrument panel box holder with the 2 screws <E>.

  9. INSTALL INSTRUMENT PANEL BOX ASSEMBLY


    1. Attach the 6 clips to instrument panel box.

  10. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    1. Connect each connector.

    2. Attach the 13 clips to install the center instrument cluster finish panel sub-assembly.

  11. FILL WASHER JAR WITH WASHER FLUID


    1. Fill the washer jar with washer fluid.