CENTER AIRBAG SENSOR ASSEMBLY INSTALLATION


  1. INSTALL CENTER AIRBAG SENSOR ASSEMBLY


    1. Install the center airbag sensor assembly to the bracket with the 3 bolts.

      Torque:
      14 N*m  { 138 kgf*cm, 10 ft.*lbf }

  2. INSTALL BRACKET


    1. Install the bracket together with the center airbag sensor assembly with the 4 bolts.

      Torque:
      14 N*m  { 138 kgf*cm, 10 ft.*lbf }

    2. Attach the clamp to connect the connector.

  3. INSTALL PEDAL BRACKET ASSEMBLY

    Click here

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  5. PERFORM DIAGNOSTIC SYSTEM CHECK

    Click here

  6. CHECK SRS WARNING LIGHT

    Click here