FOG LIGHT ASSEMBLY INSTALLATION

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. INSTALL FOG LIGHT MOUNTING BRACKET LH


    1. Install the fog light mounting bracket LH with the 3 bolts.

      Torque:
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

    2. Attach the clamp.

  2. INSTALL FOG LIGHT ASSEMBLY LH


    1. Install the fog light assembly LH with the 4 screws.

      Torque:
      2.0 N*m  { 20 kgf*cm, 18 in.*lbf }

    2. Connect the connector.

  3. INSTALL FOG LIGHT COVER LH


    1. Install the fog light cover LH with the 2 screws.

      Torque:
      2.0 N*m  { 20 kgf*cm, 18 in.*lbf }

  4. INSTALL FRONT BUMPER BAR

    Click here

  5. ADJUST FOG LIGHT AIMING

    Click here