N04C-UH COMPRESSOR REMOVAL


  1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

    See Pub. No. RM1008E.

  2. REMOVE FAN AND GENERATOR V BELT


    1. A01CI02E01

      Loosen the bolts (A) and (B).

    2. Loosen the bolt (C), then remove the fan and generator V belt.

  3. REMOVE NO. 1 V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT


    1. A01CHHDE01

      Loosen the bolt (A).

    2. Loosen the bolt (B), then remove the No. 1 V (cooler compressor to crankshaft pulley) belt.

  4. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE


    1. A01CI70

      Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the compressor.

    2. Remove the O-ring from the No. 1 cooler refrigerant discharge hose.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  5. DISCONNECT NO. 1 COOLER REFRIGERANT SUCTION HOSE


    1. A01CIDH

      Remove the bolt and disconnect the No. 1 cooler refrigerant suction hose from the compressor.

    2. Remove the O-ring from the No. 1 cooler refrigerant suction hose.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  6. REMOVE COMPRESSOR AND MAGNETIC CLUTCH


    1. Disconnect the connector.

    2. A01CJ62

      Remove the 4 bolts and disconnect the compressor and magnetic clutch.