FRONT BLOWER MOTOR REMOVAL


  1. REMOVE INSTRUMENT PANEL SUB-ASSEMBLY

    Click here

  2. REMOVE WIRE HARNESS CLAMP BRACKET


    1. A01CHJ6

      Detach the 2 wire harness clamps and separate the wire harness.

    2. A01CIJ5

      Remove the 2 screws and the wire harness clamp bracket.

    3. A01CIT2

      Remove the screw and the wire harness clamp bracket.

  3. REMOVE BLOWER MOTOR WITH FAN SUB-ASSEMBLY


    1. A01CIRR

      Disconnect the connector.

    2. Remove the 3 screws and the blower motor with fan sub-assembly.