EXHAUST BRAKE NEUTRAL SWITCH INSPECTION


  1. INSPECT EXHAUST BRAKE NEUTRAL SWITCH ASSEMBLY


    1. A01CHUZE01
      Text in Illustration
      *1 Shaft
      *a

      Component without harness connected

      (Exhaust Brake Neutral Switch Assembly)

      Check the resistance.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        1 - 2 Released 10 kΩ or higher
        1 - 2 Pushed in Below 1 Ω

        If the result is not as specified, replace the exhaust brake neutral switch assembly.