VACUUM WARNING BUZZER REMOVAL


  1. REMOVE INSTRUMENT CLUSTER FINISH PANEL NO.1


    1. A01CJ8YE01

      Disengage the 6 claws and remove the instrument cluster finish panel.

  2. REMOVE COMBINATION METER


    1. A01CGWA

      Remove the 3 screws and pull on the combination meter to the extent that allows disconnection of the connector.

    2. Disconnect the connector and remove the combination meter.

  3. REMOVE VACUUM WARNING BUZZER


    1. A01CH5R

      Disconnect the vacuum warning buzzer connector and disconnect the harness clamp from the pedal support bracket.

    2. Remove the bolt and remove the vacuum warning buzzer from the pedal support bracket.