CLUTCH PEDAL STROKE SENSOR INSTALLATION


  1. INSTALL CLUTCH PEDAL STROKE SENSOR ASSEMBLY


    1. A01CH80E01
      Text in Illustration
      *1 Arm
      *2 Rod
      *a Alignment Mark

      Insert the clutch pedal rod into the clutch pedal stroke sensor assembly.

    2. Align the clutch pedal stroke sensor assembly with the alignment marks on the clutch pedal bracket.

    3. Attach the clamp and install the clutch pedal stroke sensor assembly with the 2 nuts.

      Torque:
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

  2. INSTALL CLUTCH PEDAL BRACKET SUB-ASSEMBLY

    Click here

  3. CLUTCH PEDAL STROKE SENSOR ZERO POINT CALIBRATION


    1. If the clutch pedal stroke sensor has been replaced, perform clutch pedal stroke sensor zero point calibration and release position calibration Click here.