VACUUM SENSOR INSTALLATION


  1. INSTALL SKID CONTROL VACUUM SENSOR


    1. Install the 2 skid control vacuum sensors to the booster support bracket with the 4 bolts.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

    2. Connect the 2 brake booster hoses.

    3. Install the skid control vacuum sensors with bracket with the 2 bolts.

      Torque:
      20 N*m  { 199 kgf*cm, 14 ft.*lbf }

    4. Connect the 2 connectors.

    5. Connect the 2 brake booster hoses.

  2. INSTALL PEDAL BRACKET ASSEMBLY

    Click here