BRAKE ACTUATOR REASSEMBLY


  1. INSTALL BRAKE ACTUATOR BRACKET CUSHION


    1. Install the 3 brake actuator bracket cushions to the brake actuator bracket assembly.

    2. Install the 3 brake actuator case collars to the 3 brake actuator bracket cushions.

  2. INSTALL BRAKE ACTUATOR BRACKET ASSEMBLY


    1. Install the actuator bracket with the 3 bolts.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

      Note

      Do not remove the hole plug before installing a new brake actuator because the brake actuator is filled with brake fluid.