EASY AND SMOOTH START SYSTEM, Diagnostic DTC:C1388/117

DTC Code DTC Name
C1388/117 ES Start Initialization

DESCRIPTION

If there is a malfunction in the TC, TACH, PKB or PKB1 circuit, clutch pedal stroke sensor zero point calibration or release position calibration may not be completed properly.

DTC Code DTC Detection Condition Trouble Area
C1388/117 Zero point calibration or release position calibration of the clutch pedal stroke sensor is not performed. Perform zero point calibration or release position calibration of the clutch pedal stroke sensor. If the DTC is cleared, it is not a malfunction.

INSPECTION PROCEDURE

PROCEDURE


  1. PERFORM REGISTRATION AND CALIBRATION (CLUTCH PEDAL STROKE SENSOR)


    1. Perform registration and calibration of the clutch pedal stroke sensor Click here.

    2. Check that the initialization and calibration are completed by the buzzer sound.

      Result
      Result Proceed to
      Registration is completed A
      Registration is not completed B

    B

    CHECK PROBLEM SYMPTOMS TABLE Click here

    A

  2. RECONFIRM DTC


    1. Clear the DTCs Click here.

    2. Check if the same DTC is recorded Click here.

      Result
      Result Proceed to
      DTC (C1388/117) is not output. A
      A DTC other than C1388/117 is output. B
      DTC check cannot be performed. C

    B

    REPAIR CIRCUITS INDICATED BY OUTPUT DTC Click here

    C

    REPLACE SKID CONTROL ECU

    A

    END