EASY AND SMOOTH START SYSTEM CALIBRATION


  1. RELEASE TIMING CALIBRATION


    1. Start the engine and turn the ES start main switch on.

    2. Push the ES start timing switch toward the FAST or SLOW side for 0.5 seconds or more.

    3. If brake drag occurs, push the ES start timing switch toward the FAST side, or if the vehicle rolls backwards, push it toward the SLOW side.

    4. There are up to 8 calibration stages available for FAST and up to 5 stages available for SLOW. The buzzer sounds according to the calibration stage.

      Calibration Stage Buzzer Sound
      FAST side Short beep
      Neutral position Long beep
      SLOW side Two short beeps

      Tech Tips

      If the brakes are not fully released, perform Release Position Calibration Click here.