FRONT SPEED SENSOR INSTALLATION


  1. INSTALL FRONT SPEED SENSOR


    1. A01CHJU

      Install the front speed sensor to the axle hub with the bolt.

      Torque:
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

      Note

      Prevent foreign matter from attaching to the sensor tip.

    2. A01CHHV

      Install the front speed sensor to the bracket with the bolt.

      Torque:
      19 N*m  { 194 kgf*cm, 14 ft.*lbf }

      Note

      Do not twist the wire harness for the front speed sensor when installing the speed sensor.

    3. A01CGS8

      Install the front speed sensor with the nut and bolt.

      Torque:
      19 N*m  { 194 kgf*cm, 14 ft.*lbf }

    4. Connect the speed sensor connector.

  2. INSTALL FRONT WHEEL

    Torque:
    515 N*m  { 5250 kgf*cm, 380 ft.*lbf }

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Click here

  4. CHECK FOR SPEED SENSOR SIGNAL

    Tech Tips

    Click here