EASY AND SMOOTH START SYSTEM HOW TO PROCEED WITH TROUBLESHOOTING

Tech Tips

*: Use the intelligent tester.


  1. VEHICLE BROUGHT TO WORKSHOP


    NEXT

  2. CUSTOMER PROBLEM ANALYSIS


    1. Interview the customer and confirm the problem Click here.


      NEXT

  3. CHECK DTC


    1. Check and record DTCs.

    2. Clear the DTCs Click here.

    3. Reconfirm the DTCs.


      1. Reconfirm the DTCs based on the recorded DTCs Click here.

        Result
        Result Proceed to
        DTC is output A
        DTC is not output (Problem symptom does not occur) B
        DTC is not output (Problem symptom occurs) C

      B

      GO TO STEP 5
      C

      GO TO STEP 6
      A

  4. DIAGNOSTIC TROUBLE CODE CHART


    1. Proceed to Diagnostic Trouble Code Chart Click here.


      NEXT
      GO TO STEP 7

  5. SYMPTOM SIMULATION


    1. Proceed to How to Proceed with Troubleshooting Click here.


      NEXT

  6. PROBLEM SYMPTOMS TABLE


    1. Proceed to Problem Symptoms Table Click here.


      NEXT

  7. CIRCUIT INSPECTION*


    NEXT

  8. IDENTIFICATION OF PROBLEM


    NEXT

  9. REPAIR OR REPLACEMENT


    NEXT

  10. CONFIRMATION TEST*


    NEXT
    END