FRONT SEAT ASSEMBLY (for Driver Seat without Suspension Type Seat Cushion) INSTALLATION


  1. INSTALL FRONT SEAT ASSEMBLY


    1. Place the front seat assembly in the cabin.

      Note

      Be careful not to damage the vehicle body.

    2. w/ Seat Belt Warning System:

      Connect the connector and attach the wire harness clamp.

    3. Temporarily install the front seat assembly with the 4 bolts.

    4. Operate the seat track handle sub-assembly LH and move the front seat assembly to the rearmost position.

      Note

      Make sure that the seat is locked.

    5. A01CHN0E01

      Tighten the 2 bolts in the order shown in the illustration.

      Torque:
      39 N*m  { 398 kgf*cm, 29 ft.*lbf }

    6. Operate the seat track handle sub-assembly LH and move the front seat assembly to the foremost position.

      Note

      Make sure that the seat is locked.

    7. A01CIUPE01

      Tighten the 2 bolts in the order shown in the illustration.

      Torque:
      39 N*m  { 398 kgf*cm, 29 ft.*lbf }

  2. INSTALL SEAT TRACK COVER RH


    1. Attach the 2 claws to install the seat track cover RH.