FRONT SEAT ASSEMBLY (for Driver Seat without Suspension Type Seat Cushion) DISASSEMBLY

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


  1. REMOVE RECLINING ADJUSTER RELEASE HANDLE LH


    1. A01CH6SE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, detach the claw and remove the reclining adjuster release handle LH.

      Tech Tips

      Tape the screwdriver tip before use.

  2. REMOVE RECLINING ADJUSTER COVER LH


    1. A01CHX8

      Remove the screw.

    2. Detach the guide and remove the reclining adjuster cover LH.

  3. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH

    A01CID8

    1. Detach the 2 wire harness clamps.

    2. Pass the wire harness through the back side of the front seat assembly LH and disconnect the wire harness from the front seat assembly LH.

    3. A01CGLE

      Remove the nut and front seat inner belt assembly LH from the front seat assembly LH.

  4. REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY


    1. A01CHZI

      Remove the 2 bolts, nut and separate type front seatback assembly.

  5. REMOVE SEPARATE TYPE FRONT SEATBACK COVER


    1. A01CH0T

      Remove the hog rings.

    2. A01CGU2

      Remove the hog rings and roll up the separate type front seatback cover.

    3. A01CGSI

      Remove the hog rings and separate type front seatback cover from the separate type front seatback pad.

  6. REMOVE SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY


    1. Remove the separate type front seatback spring assembly from the separate type front seatback pad.

  7. REMOVE FRONT SEATBACK EDGE PROTECTOR


    1. A01CIWD

      Remove the front seatback edge protector from the separate type front seatback spring assembly.

  8. REMOVE FRONT NO. 2 SEATBACK EDGE PROTECTOR


    1. A01CGRL

      Remove the front No. 2 seatback edge protector from the separate type front seatback spring assembly.

  9. REMOVE RECLINING ADJUSTER INSIDE COVER LH


    1. A01CIQZ

      Remove the screw and reclining adjuster inside cover LH.

  10. REMOVE FRONT SEAT HINGE COVER RH


    1. A01CHQI

      Remove the front seat hinge cover RH as shown in the illustration.

  11. REMOVE FRONT SEAT HINGE PIN BUSH


    1. A01CILE

      Remove the front seat hinge pin bush as shown in the illustration.

  12. REMOVE FRONT SEAT CUSHION SPRING


    1. A01CJGO

      Remove the front seat cushion spring as shown in the illustration.

  13. REMOVE SEPARATE TYPE FRONT SEAT CUSHION ASSEMBLY


    1. A01CGRB

      Detach the 2 hooks.

    2. Remove the 4 nuts and separate type front seat cushion assembly.

  14. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. A01CGWG

      Bend the 2 separate type front seat cushion spring assembly claws upward.

    2. A01CIL6E02

      Remove the hog rings.

    3. Detach the hooks.

      Text in Illustration
      *1 Hook
      *2 Hog Ring

    4. Remove the separate type front seat cushion spring assembly from the separate type front seat cushion pad.

    5. A01CIFX

      Remove the hog rings and separate type front seat cushion cover from the separate type front seat cushion pad.

  15. REMOVE FRONT SEAT CUSHION PROTECTOR


    1. A01CINH

      Remove the 2 front seat cushion protectors.

  16. REMOVE SEAT TRACK HANDLE SUB-ASSEMBLY LH


    1. A01CJFG

      Operate the seat track handle sub-assembly LH and slide the front outer seat track assembly LH and front inner seat track assembly LH toward the rear.

    2. Using a screwdriver, detach the 2 claws and remove the seat track handle sub-assembly LH.

  17. REMOVE FRONT SEAT STAND FRAME REINFORCE


    1. A01CHJR

      Remove the 2 bolts and front seat stand frame reinforce.