FRONT SEAT ASSEMBLY (for Driver Seat without Suspension Type Seat Cushion) REMOVAL


  1. REMOVE SEAT TRACK COVER RH


    1. Operate the seat track handle sub-assembly LH and move the front seat assembly to the rearmost position.

    2. A01CIWJ

      Using moulding remover A, detach the 2 claws and remove the seat track cover RH.

  2. REMOVE FRONT SEAT ASSEMBLY


    1. A01CHN0

      Remove the 2 bolts on the front side of the seat.

    2. Operate the seat track handle sub-assembly LH and move the front seat assembly to the foremost position.

    3. A01CIRK

      Remove the 2 bolts on the rear side of the seat.

    4. w/ Seat Belt Warning System:

      Disconnect the connector and detach the wire harness clamp.

    5. Remove the front seat assembly.

      Note

      Be careful not to damage the vehicle body.