POWER TAKE-OFF SWITCH INSPECTION


  1. INSPECT POWER TAKE-OFF INDICATOR SWITCH ASSEMBLY


    1. A01CJCYE01
      Text in Illustration
      *a

      Component without harness connected

      (Power Take-off Indicator Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      2 - 5 Power take-off indicator switch assembly off 10 kΩ or higher
      2 - 5 Power take-off indicator switch assembly on Below 1 Ω

      If the result is not as specified, replace the power take-off indicator switch assembly.