HIGH MOUNTED STOP LIGHT ASSEMBLY INSTALLATION

PROCEDURE


  1. INSTALL CENTER STOP LIGHT ASSEMBLY


    1. Install a new packing.

    2. A01VKKAE02
      Text in Illustration
      *a Upper Side (side with short claws)
      *b Lower Side (side with long claws)

      Engage the 4 claws to install a new clip.

      Note

      Make sure not to install the clip upside-down.

      Tech Tips

      Use the same procedure as for the opposite side.

    3. Connect the connector.

    4. A01VGR6

      Engage the 4 claws of the clips and install the center stop light assembly.

      Note

      Make sure not to deform the packing at this point.

  2. INSTALL REAR LIGHT COVER


    1. Engage the 6 claws to install the rear light cover.