HIGH MOUNTED STOP LIGHT ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE REAR LIGHT COVER


    1. A0049YZ

      Disengage the 6 claws to remove the rear light cover.

  2. REMOVE CENTER STOP LIGHT ASSEMBLY


    1. A00485C

      Press up and disengage the 2 claws that are on the side of the clips that is facing towards you.

      CAUTION:

      Make sure not to cut your fingers or hands on the edge of the back door panel.

    2. A004AQBE05

      For the clip on the LH side press up and disengage the claw on the side that is facing away from you.

      CAUTION:

      Make sure not to cut your fingers or hands on the edge of the back door panel.

    3. For the clip on the RH side press up and disengage the claw on the side that is facing away from you.

      CAUTION:

      Make sure not to cut your fingers or hands on the edge of the back door panel.

    4. Disconnect the connector to remove the center stop light assembly.