HIGH MOUNTED STOP LIGHT ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE REAR LIGHT COVER


    1. A01VG39

      Disengage the 6 claws to remove the rear light cover.

  2. REMOVE CENTER STOP LIGHT ASSEMBLY


    1. A01VK46

      Press up and disengage the 2 claws that are on the side of the clips that is facing towards you.

      CAUTION:

      Make sure not to cut your fingers or hands on the edge of the back door panel.

    2. A01VH7OE05

      For the clip on the LH side press up and disengage the claw on the side that is facing away from you.

      CAUTION:

      Make sure not to cut your fingers or hands on the edge of the back door panel.

    3. For the clip on the RH side press up and disengage the claw on the side that is facing away from you.

      CAUTION:

      Make sure not to cut your fingers or hands on the edge of the back door panel.

    4. Disconnect the connector to remove the center stop light assembly.

    5. A01VE85E01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver with its tip wrapped in protective tape, disengage the 4 claws to remove the clip.

      Tech Tips

      Use the same procedure as for the opposite side.

    6. A01VHGJ

      Remove the packing.