REAR LIGHT ASSEMBLY(for LED Type Stop Light) INSPECTION

PROCEDURE

1. INSPECT REAR LIGHT ASSEMBLY LH

   
   

   1. w/o Rear Fog Light:

      
      
      1. 

         *a	Component without harness connected (Rear Light Assembly LH)

         Apply battery voltage to the rear light assembly LH and check that the light comes on.

         OK
         Condition Specified Condition Battery positive (+) → Terminal 2 (B) Battery negative (-) → Terminal 1 (E) Back up light comes on Battery positive (+) → Terminal 4 (B) Battery negative (-) → Terminal 1 (E) Taillight comes on

         If the result is not as specified, replace the rear light assembly LH.

   2. w/ Rear Fog Light:

      
      
      1. 

         *a	Component without harness connected (Rear Light Assembly LH)

         Apply battery voltage to the rear light assembly LH and check that the light comes on.

         OK
         Condition Specified Condition Battery positive (+) → Terminal 2 (B) Battery negative (-) → Terminal 1 (E) Back up light comes on Battery positive (+) → Terminal 4 (B) Battery negative (-) → Terminal 1 (E) Taillight comes on Battery positive (+) → Terminal 3 (B) Battery negative (-) → Terminal 1 (E) Rear fog light comes on

         If the result is not as specified, replace the rear light assembly LH.

2. INSPECT REAR LIGHT ASSEMBLY RH

   
   

   1. w/o Rear Fog Light:

      
      
      1. 

         *a	Component without harness connected (Rear Light Assembly RH)

         Apply battery voltage to the rear light assembly RH and check that the light comes on.

         OK
         Condition Specified Condition Battery positive (+) → Terminal 2 (B) Battery negative (-) → Terminal 1 (E) Back up light comes on Battery positive (+) → Terminal 4 (B) Battery negative (-) → Terminal 1 (E) Taillight comes on

         If the result is not as specified, replace the rear light assembly RH.

   2. w/ Rear Fog Light:

      
      
      1. 

         *a	Component without harness connected (Rear Light Assembly RH)

         Apply battery voltage to the rear light assembly RH and check that the light comes on.

         OK
         Condition Specified Condition Battery positive (+) → Terminal 2 (B) Battery negative (-) → Terminal 1 (E) Back up light comes on Battery positive (+) → Terminal 4 (B) Battery negative (-) → Terminal 1 (E) Taillight comes on Battery positive (+) → Terminal 3 (B) Battery negative (-) → Terminal 1 (E) Rear fog light comes on

         If the result is not as specified, replace the rear light assembly RH.