REAR COMBINATION LIGHT ASSEMBLY(for Bulb Type Stop Light) REASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for both the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY


    1. A0049E2

      Engage the 2 clamps to install the rear combination light socket and wire sub-assembly.

  2. INSTALL REAR TURN SIGNAL LIGHT BULB


    1. Install the rear turn signal light bulb into the rear combination light socket and wire sub-assembly.

    2. A0049RZ

      Turn the rear combination light socket and wire sub-assembly and rear turn signal light bulb in the direction indicated by the arrow in the illustration to install them.

  3. INSTALL TAIL AND STOP LIGHT BULB


    1. Install the tail and stop light bulb into the rear combination light socket and wire sub-assembly.

    2. A0047AE

      Turn the rear combination light socket and wire sub-assembly and tail and stop light bulb in the direction indicated by the arrow in the illustration to install them.

  4. INSTALL REAR COMBINATION LIGHT PACKING


    1. A0049RQ

      Install a new rear combination light packing.

  5. INSTALL REAR BUMPER SIDE SUPPORT


    1. A0046RW

      Install the rear bumper side support with the 2 screws.