REAR COMBINATION LIGHT ASSEMBLY(for Bulb Type Stop Light) REASSEMBLY

PROCEDURE


  1. INSTALL REAR COMBINATION LIGHT PROTECTOR


    1. A01V1ED

      Install the rear combination light protector with the 2 screws.

  2. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY


    1. A01UZOH

      Engage the 2 clamps to install the rear combination light socket and wire sub-assembly.

  3. INSTALL REAR TURN SIGNAL LIGHT BULB


    1. Install the rear turn signal light bulb into the rear combination light socket and wire sub-assembly.

    2. A01UZZE

      Turn the rear combination light socket and wire sub-assembly and bulb in the direction indicated by the arrow in the illustration to install them.

  4. INSTALL TAIL AND STOP LIGHT BULB


    1. Install the tail and stop light bulb into the rear combination light socket and wire sub-assembly.

    2. A01UZ4D

      Turn the rear combination light socket and wire sub-assembly and bulb in the direction indicated by the arrow in the illustration to install them.

  5. INSTALL REAR COMBINATION LIGHT BODY PACKING


    1. A01V203

      Install a new rear combination light body packing.

  6. INSTALL REAR BUMPER SIDE SUPPORT

    Click here