REAR COMBINATION LIGHT ASSEMBLY(for Bulb Type Stop Light) DISASSEMBLY

PROCEDURE


  1. REMOVE REAR COMBINATION LIGHT BODY PACKING


    1. A01VK0R

      Remove the rear combination light body packing.

      Note


      • Be sure to remove all the traces of the old packing from the body.

      • Do not reuse the removed packing. Be sure to install a new rear combination light body packing to prevent water ingress.

  2. REMOVE TAIL AND STOP LIGHT BULB


    1. A01VJUO

      Turn the rear combination light socket and wire sub-assembly and bulb in the direction indicated by the arrow in the illustration to remove them.

    2. Remove the tail and stop light bulb from the rear combination light socket and wire sub-assembly.

  3. REMOVE REAR TURN SIGNAL LIGHT BULB


    1. A01VJ5I

      Turn the rear combination light socket and wire sub-assembly and bulb in the direction indicated by the arrow in the illustration to remove them.

    2. Remove the rear turn signal light bulb from the rear combination light socket and wire sub-assembly.

  4. REMOVE BACK UP LIGHT BULB


    1. A01VDM3

      Turn the rear combination light socket and wire sub-assembly and bulb in the direction indicated by the arrow in the illustration to remove them.

    2. Remove the back up light bulb from the rear combination light socket and wire sub-assembly.

  5. REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY


    1. A01VE2C

      Disengage the clamp to remove the rear combination light socket and wire sub-assembly.

  6. REMOVE REAR COMBINATION LIGHT COVER


    1. A01VG2G

      Remove the 2 screws and the rear combination light cover.

  7. REMOVE REAR COMBINATION LIGHT PROTECTOR


    1. A01VE8W

      Remove the 2 screws and the rear combination light protector.