REAR COMBINATION LIGHT ASSEMBLY(for LED Type Stop Light) DISASSEMBLY

PROCEDURE


  1. REMOVE REAR COMBINATION LIGHT BODY PACKING


    1. A01VHN7

      Remove the rear combination light body packing.

      Note


      • Be sure to remove all the traces of the old packing from the body.

      • Do not reuse the removed packing. Be sure to install a new rear combination light body packing to prevent water ingress.

  2. REMOVE REAR TURN SIGNAL LIGHT BULB


    1. A01VEVJ

      Turn the rear combination light socket and wire sub-assembly with the rear turn signal light bulb in the direction indicated by the arrow in the illustration to remove them.

    2. Remove the rear turn signal light bulb from the rear combination light socket and wire sub-assembly.

  3. REMOVE BACK UP LIGHT BULB


    1. A01VGKJ

      Turn the rear combination light socket and wire sub-assembly with the back up light bulb in the direction indicated by the arrow in the illustration to remove them.

    2. Remove the back up light bulb from the rear combination light socket and wire sub-assembly.

  4. REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY


    1. A01VIXL

      Disconnect the connector.

    2. Disengage the 2 clamps to remove the rear combination light socket and wire sub-assembly.