REAR COMBINATION LIGHT ASSEMBLY(for LED Type Stop Light) DISASSEMBLY

PROCEDURE

1. Click here

   REMOVE REAR BUMPER SIDE SUPPORT

   Click here

2. Click here

   REMOVE REAR COMBINATION LIGHT BODY PACKING

   
   
   1. 

      Remove the rear combination light body packing.

      Note:
      

      • Be sure to remove all the traces of the old packing from the body.

      • Do not reuse the removed packing. Be sure to install a new rear combination light body packing to prevent water ingress.

3. Click here

   REMOVE REAR TURN SIGNAL LIGHT BULB

   
   
   1. 

      Turn the rear combination light socket and wire sub-assembly with the rear turn signal light bulb in the direction indicated by the arrow in the illustration to remove them.

   2. Remove the rear turn signal light bulb from the rear combination light socket and wire sub-assembly.

4. Click here

   REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY

   
   
   1. 

      Disconnect the connector.

   2. Disengage the 2 clamps to remove the rear combination light socket and wire sub-assembly.

5. Click here

   REMOVE REAR COMBINATION LIGHT PROTECTOR

   
   
   1. 

      Remove the 2 screws and rear combination light protector.