SIDE TURN SIGNAL LIGHT ASSEMBLY(for TMC Made) INSPECTION

PROCEDURE


  1. INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY LH


    1. A01VGEPE01
      Text in Illustration
      *a

      Component without harness connected

      (Side Turn Signal Light Assembly LH)

      Apply battery voltage to the connector and check the side turn signal light comes on.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → 1

      Battery negative (-) → 2

      		 Side turn signal light comes on

      If the result is not as specified, replace the side turn signal light assembly LH.

  2. INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY RH


    1. A01VGEPE01
      Text in Illustration
      *a

      Component without harness connected

      (Side Turn Signal Light Assembly RH)

      Apply battery voltage to the connector and check the side turn signal light comes on.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → 1

      Battery negative (-) → 2

      		 Side turn signal light comes on

      If the result is not as specified, replace the side turn signal light assembly RH.