REAR COMBINATION LIGHT ASSEMBLY(for LED Type Stop Light) REASSEMBLY

PROCEDURE


  1. INSTALL REAR COMBINATION LIGHT PROTECTOR LH


    1. A01VLF1

      Install the rear combination light protector with the 2 screws.

  2. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY


    1. A01VFVT

      Engage the 2 clamps to install the rear combination light socket and wire sub-assembly.

    2. Connect the connector.

  3. INSTALL REAR TURN SIGNAL LIGHT BULB


    1. Install the rear turn signal light bulb into the rear combination light socket and wire sub-assembly.

    2. A01VJK3

      Turn the rear combination light socket and wire sub-assembly with the rear turn signal light bulb in the direction indicated by the arrow in the illustration to install them.

  4. INSTALL REAR COMBINATION LIGHT BODY PACKING


    1. A01VJSC

      Install a new rear combination light body packing.

  5. INSTALL REAR BUMPER SIDE SUPPORT

    Click here