REAR COMBINATION LIGHT ASSEMBLY(for LED Type Stop Light) REASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for both the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY


    1. A0049DM

      Engage the 2 clamps to install the rear combination light socket and wire sub-assembly.

    2. Connect the connector.

  2. INSTALL REAR TURN SIGNAL LIGHT BULB


    1. Install the rear turn signal light bulb into the rear combination light socket and wire sub-assembly.

    2. A0046YB

      Turn the rear combination light socket and wire sub-assembly with the rear turn signal light bulb in the direction indicated by the arrow in the illustration to install them.

  3. INSTALL REAR COMBINATION LIGHT PACKING


    1. A0049RQ

      Install a new rear combination light packing.

  4. INSTALL REAR BUMPER SIDE SUPPORT


    1. A0046RW

      Install the rear bumper side support with the 2 screws.