WIPER ECU INSTALLATION

PROCEDURE

1. INSTALL WINDSHIELD WIPER RELAY ASSEMBLY

   
   

   1. Engage the guide.

   2. Install the windshield wiper relay with the bolt.

      Torque:

      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

   3. Connect the connector.

2. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

   Click here

3. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (for LHD)

   Click here

4. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (for RHD)

   
   

   1. w/ Knee Airbag:

      Tech Tips

      Use the same procedure as for the LHD Click here.

5. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL (for RHD)

   
   

   1. w/o Knee Airbag:

      
      

      1. Engage the 6 claws and 2 clips and install the instrument panel finish panel.

6. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

   Tech Tips

   Use the same procedure as for the LHD Click here.

7. INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY

   Click here

8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Torque:

   5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

9. INSPECT SRS WARNING LIGHT

   Click here