WASHER NOZZLE(for Front) ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT WASHER NOZZLE SUB-ASSEMBLY (for LHD)


    1. With the engine running, check where the washer fluid hits the windshield.

      B004576E01
      Standard
      Area Measurement Area Measurement
      A 240 mm (9.45 in.) C 30 mm (1.18 in.)
      B 320 mm (12.60 in.) D 15 mm (0.591 in.)
      OK
      Washer fluid hits the windshield in the areas as shown in the illustration.

      If the result is not as specified, adjust the washer nozzle sub-assembly.

  2. INSPECT WASHER NOZZLE SUB-ASSEMBLY (for RHD)


    1. With the engine running, check where the washer fluid hits the windshield.

      B004876E01
      Standard
      Area Measurement Area Measurement
      A 240 mm (9.45 in.) C 30 mm (1.18 in.)
      B 320 mm (12.60 in.) D 15 mm (0.591 in.)
      OK
      Washer fluid hits the windshield in the areas as shown in the illustration.

      If the result is not as specified, adjust the washer nozzle sub-assembly.