WIPER SWITCH INSTALLATION

PROCEDURE


  1. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY


    1. A01VFMC

      Engage the claw and install the windshield wiper switch.

    2. Connect the 2 connectors.

  2. INSTALL UPPER STEERING COLUMN COVER


    1. Engage the claw and install the upper steering column cover.

  3. INSTALL LOWER STEERING COLUMN COVER


    1. Engage the 3 claws to install the lower steering column cover.

    2. While turning the steering wheel to the right and left, install the 2 screws.

    3. Install the screw to the lower portion of the lower steering column cover.

      Note

      After installing the steering column cover lower, check to make sure that it does not rattle and is not loose. If the steering column cover lower is loose or rattles, replace the installation grommet for the lower side screw with a new one.

  4. INSTALL STEERING COLUMN COVER SUPPORT (w/ Entry and Start System)

    Click here