WIPER SWITCH REMOVAL

PROCEDURE


  1. REMOVE STEERING COLUMN COVER SUPPORT (w/ Entry and Start System)

    Click here

  2. REMOVE LOWER STEERING COLUMN COVER


    1. Release the tilt lever, and fully extend and lower the steering column.

    2. A01VM7Q

      Remove the screw from the lower portion of the lower steering column cover.

    3. While turning the steering wheel to the right and left, remove the 2 screws.

    4. Disengage the 3 claws and remove the lower steering column cover.

  3. REMOVE UPPER STEERING COLUMN COVER


    1. A01VL4M

      Disengage the claw and remove the upper steering column cover.

  4. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY


    1. A01VHR2E04
      Text in Illustration
      *1 Protective Tape

      Disconnect the 2 connectors.

    2. Using a screwdriver with its tip wrapped in protective tape, disengage the claw and remove the windshield wiper switch as shown in the illustration.

      Note

      If the claw is pushed with excessive force, it may break.