FUEL LID LOCK CONTROL CABLE ASSEMBLY(for 3 Door) INSTALLATION

Click here

PROCEDURE

1. Click here

   INSTALL FUEL FILLER OPENING LID LOCK RETAINER

   
   
   1. 

      Align the 2 claws B of the fuel filler opening lid lock retainer with the 2 slits.

   2. Push in and install the fuel filler opening lid lock retainer while securely engaging the 2 claws A.

      Table 1. Text in Illustration

      *1	Claw A
      *2	Claw B
      *a	Slit

2. Click here

   INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY (for LHD)

   
   
   1. 

      Install the fuel lid lock control cable sub-assembly to the 4 clamps as shown in the illustration.

      Table 2. Text in Illustration

      *1

      Fuel Lid Lock Control Cable Sub-assembly

      *2

      Clamp

   2. 

      Engage the 2 claws and install the fuel lid lock control cable sub-assembly.

3. Click here

   INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY (for RHD)

   
   
   1. 

      Install the fuel lid lock control cable sub-assembly to the 7 clamps as shown in the illustration.

      Table 3. Text in Illustration

      *1

      Fuel Lid Lock Control Cable Sub-assembly

      *2

      Clamp

   2. 

      Engage the 2 claws and install the fuel lid lock control cable sub-assembly.

4. Click here

   INSTALL FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY

   
   

   1. Engage the guide and connect the fuel lid lock control cable sub-assembly to the fuel lid lock open lever sub-assembly.

   2. 

      Engage the guide and install the fuel lid lock open lever sub-assembly in the direction indicated by the arrow as shown in the illustration.

   3. Install the screw.

      5.5 N*m

      56 kgf*cm

      49 in.*lbf

5. Click here

   INSTALL FRONT FLOOR CARPET ASSEMBLY

   
   

   1. Engage the 6 clamps.

   2. Install the front floor carpet assembly with the clip.

   3. w/ Jack Assembly:

      
      

      1. Install the jack assembly.

6. Click here

   INSTALL NO. 2 FLOOR CARPET HOOK

   Tip:

   Use the same procedure for both sides.

   
   
   1. 

      Insert the hook of the No. 2 floor carpet hook and rotate it 90° in the direction shown by the arrow in the illumination to engage the hook, and install the No. 2 floor carpet hook.

7. Click here

   INSTALL JACK COVER

8. Click here

   INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

   Tip:

   Use the same procedure as for the RH side (Click here)

9. Click here

   INSTALL NO. 2 ROOM LIGHT ASSEMBLY

   Click here

10. Click here

    INSTALL REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY RH

    Click here

11. Click here

    INSTALL REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY LH

    Tip:

    Use the same procedure as for the RH side.

12. Click here

    INSTALL REAR FLOOR FINISH PLATE

    Click here

13. Click here

    INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH

    Click here

14. Click here

    INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH

    Tip:

    Use the same procedure as for the RH side.

15. Click here

    INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

    
    

    1. Install the front door opening trim weatherstrip RH.

16. Click here

    INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

    
    

    1. Install the front door opening trim weatherstrip LH.

17. Click here

    INSTALL COWL SIDE TRIM BOARD RH

    Click here

18. Click here

    INSTALL COWL SIDE TRIM BOARD LH

    Tip:

    Use the same procedure as for the RH side.

19. Click here

    INSTALL FRONT DOOR SCUFF PLATE RH

    Click here

20. Click here

    INSTALL FRONT DOOR SCUFF PLATE LH

    Tip:

    Use the same procedure as for the RH side.

21. Click here

    INSTALL REAR CONSOLE BOX

    (Click here)

22. Click here

    INSTALL REAR SEAT ASSEMBLY (for 60/40 Split Seat Type LH Side)

    (Click here)

23. Click here

    INSTALL REAR SEAT ASSEMBLY (for 60/40 Split Seat Type RH Side)

    (Click here)

24. Click here

    INSTALL FRONT SEAT ASSEMBLY

    (Click here)

25. Click here

    INSTALL SPARE WHEEL COVER

    Click here

26. Click here

    INSTALL DECK BOARD ASSEMBLY

    Click here