FUEL LID LOCK CONTROL CABLE ASSEMBLY(for 3 Door) REMOVAL

PROCEDURE


  1. REMOVE DECK BOARD ASSEMBLY

    Click here

  2. REMOVE SPARE WHEEL COVER

    Click here

  3. REMOVE FRONT SEAT ASSEMBLY

    Click here

  4. REMOVE REAR SEAT ASSEMBLY (for 60/40 Split Seat Type LH Side)

    Click here

  5. REMOVE REAR SEAT ASSEMBLY (for 60/40 Split Seat Type RH Side)

    Click here

  6. REMOVE REAR CONSOLE BOX

    Click here

  7. REMOVE FRONT DOOR SCUFF PLATE RH

    Click here

  8. REMOVE FRONT DOOR SCUFF PLATE LH

    Tech Tips

    Use the same procedure as for the RH side.

  9. REMOVE COWL SIDE TRIM BOARD RH

    Click here

  10. REMOVE COWL SIDE TRIM BOARD LH

    Tech Tips

    Use the same procedure as for the RH side.

  11. SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP RH


    1. Separate the front door opening trim weatherstrip.

  12. SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP LH


    1. Separate the front door opening trim weatherstrip.

  13. REMOVE FRONT SEAT OUTER BELT BAR SUB-ASSEMBLY RH

    Click here

  14. REMOVE FRONT SEAT OUTER BELT BAR SUB-ASSEMBLY LH

    Tech Tips

    Use the same procedure as for the RH side.

  15. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH

    Click here

  16. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH

    Tech Tips

    Use the same procedure as for the RH side.

  17. REMOVE REAR FLOOR FINISH PLATE

    Click here

  18. SEPARATE REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY RH

    Click here

  19. SEPARATE REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY LH

    Tech Tips

    Use the same procedure as for the RH side.

  20. REMOVE NO. 2 ROOM LIGHT ASSEMBLY

    Click here

  21. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH

    Tech Tips

    Use the same procedure as for the RH side Click here.

  22. REMOVE JACK COVER

  23. REMOVE JACK ASSEMBLY

  24. REMOVE FRONT FLOOR CARPET ASSEMBLY


    1. Disengage the 6 clamps.

    2. Remove the clip and front floor carpet.

  25. REMOVE FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY


    1. A01VHJT

      Remove the bolt.

    2. Slide the fuel lid lock open lever as indicated by the arrow as shown in the illustration.

    3. A01VH45

      Disengage the guide and separate the fuel lid lock control cable.

  26. REMOVE FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY (for LHD)


    1. A01VI5Y

      Disengage the 2 claws and separate the fuel lid lock control cable.

    2. Disengage the 4 clamps and remove the fuel lid lock control cable as shown in the illustration.

      A01VFUVE03
      Text in Illustration
      *1 Fuel Lid Lock Control Cable Sub-assembly *2 Wire Harness Clamp

  27. REMOVE FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY (for RHD)


    1. A01VI5Y

      Disengage the 2 claws and separate the fuel lid lock control cable.

    2. Disengage the 7 clamps and remove the fuel lid lock control cable as shown in the illustration.

      A01VFACE02
      Text in Illustration
      *1 Fuel Lid Lock Control Cable Sub-assembly *2 Wire Harness Clamp

  28. REMOVE FUEL FILLER OPENING LID LOCK RETAINER


    1. A01VF43E02
      Text in Illustration
      *1 Claw A
      *a Slit
      *b Rotate

      Rotate the fuel filler opening lid lock retainer by 90° and disengage the 2 claws A from the 2 slits as shown in the illustration.

    2. A01VEUKE02
      Text in Illustration
      *1 Claw B
      *a Slit
      *b Rotate

      Rotate the fuel filler opening lid lock retainer by another 90° and remove it by disengaging the 2 claws B from the 2 slits as shown in the illustration.