FUEL LID LOCK CONTROL CABLE ASSEMBLY(for 5 Door) REMOVAL

Click here

PROCEDURE

1. Click here

   REMOVE DECK BOARD ASSEMBLY

   Click here

2. Click here

   REMOVE SPARE WHEEL COVER (for TMMF Made)

   Click here

3. Click here

   REMOVE FRONT SEAT ASSEMBLY

   (Click here)

4. Click here

   REMOVE REAR SEAT ASSEMBLY (for 60/40 Split Seat Type LH Side)

   (Click here)

5. Click here

   REMOVE REAR SEAT ASSEMBLY (for 60/40 Split Seat Type RH Side)

   (Click here)

6. Click here

   REMOVE REAR CONSOLE BOX ASSEMBLY

   (Click here)

7. Click here

   REMOVE FRONT DOOR SCUFF PLATE RH

   Click here

8. Click here

   REMOVE FRONT DOOR SCUFF PLATE LH

   Tip:

   Use the same procedure as for the RH side.

9. Click here

   REMOVE COWL SIDE TRIM BOARD RH

   Click here

10. Click here

    REMOVE COWL SIDE TRIM BOARD LH

    Tip:

    Use the same procedure as for the RH side.

11. Click here

    REMOVE REAR DOOR SCUFF PLATE RH

    Click here

12. Click here

    REMOVE REAR DOOR SCUFF PLATE LH

    Tip:

    Use the same procedure as for the RH side.

13. Click here

    REMOVE REAR FLOOR FINISH PLATE

    Click here

14. Click here

    SEPARATE REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY LH

    Tip:

    Use the same procedure as for the RH side (Click here).

15. Click here

    SEPARATE REAR DOOR OPENING TRIM WEATHERSTRIP

    
    

    1. Separate the rear door opening trim weatherstrip.

16. Click here

    REMOVE NO. 2 ROOM LIGHT ASSEMBLY

    Click here

17. Click here

    REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH

    Tip:

    Use the same procedure as for the RH side (Click here).

18. Click here

    REMOVE JACK COVER

19. Click here

    REMOVE NO. 2 FLOOR CARPET HOOK

    Tip:

    Use the same procedure for both sides.

    
    
    1. 

       Rotate the No. 2 floor carpet hook 90° in the direction shown by the arrow in the illustration, disengage the hook and remove the No. 2 floor carpet hook.

20. Click here

    REMOVE FRONT FLOOR CARPET ASSEMBLY

    
    

    1. w/ Jack Assembly:

       
       

       1. Remove the jack assembly.

    2. Disengage the 6 clamps.

    3. Remove the clip and the front floor carpet assembly.

21. Click here

    REMOVE FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY

    
    
    1. 

       Remove the screw.

    2. Disengage the guide and remove the fuel lid lock open lever sub-assembly in the direction indicated by the arrow as shown in the illustration.

    3. 

       Disengage the guide and disconnect the fuel lid lock control cable sub-assembly from the fuel lid lock open lever sub-assembly.

22. Click here

    REMOVE FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY (for LHD)

    
    
    1. 

       Disengage the 2 claws and separate the fuel lid lock control cable sub-assembly.

    2. 

       Remove the fuel lid lock control cable sub-assembly from the 4 clamps as shown in the illustration.

       Table 1. Text in Illustration

       *1

       Fuel Lid Lock Control Cable Sub-assembly

       *2

       Clamp

23. Click here

    REMOVE FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY (for RHD)

    
    
    1. 

       Disengage the 2 claws and separate the fuel lid lock control cable sub-assembly.

    2. 

       Remove the fuel lid lock control cable sub-assembly from the 7 clamps as shown in the illustration.

       Table 2. Text in Illustration

       *1

       Fuel Lid Lock Control Cable Sub-assembly

       *2

       Clamp

24. Click here

    REMOVE FUEL FILLER OPENING LID LOCK RETAINER

    
    
    1. 

       Rotate the fuel filler opening lid lock retainer by 90° and disengage the 2 claws A from the 2 slits as shown in the illustration.

       Table 3. Text in Illustration

       *1	Claw A
       *a	Slit
       *b	Rotate

    2. 

       Rotate the fuel filler opening lid lock retainer by another 90° and remove it by disengaging the 2 claws B from the 2 slits as shown in the illustration.

       Table 4. Text in Illustration

       *1	Claw B
       *a	Slit
       *b	Rotate