BACK DOOR SUPPORT DISPOSAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. DISPOSE OF BACK DOOR STAY ASSEMBLY


    1. A01UZXDE08

      Horizontally fix the stay in a vise with the piston-rod pulled out.

    2. Wearing protective glasses, gradually cut the shaded part between A and B, shown in the illustration, using a metal saw to gradually release the gas.

      Specification
      Area Measurement
      a 80 mm (3.15 in.)

      CAUTION:


      • Cover the area that is being cut with a piece of cloth because there is a possibility that metal shards may be dispersed by the gas.

      • The gas is colorless, odorless and harmless.