HOOD LOCK CONTROL CABLE ASSEMBLY INSTALLATION

PROCEDURE


  1. INSTALL HOOD LOCK CONTROL CABLE ASSEMBLY (for LHD)


    1. for TMC Made:


      1. Pass the hood lock control cable into the engine compartment.

      2. Connect the clamps as shown in the illustration.

        A0049UJE02
        Text in Illustration
        *1 Hood Lock Control Cable *2 Clamp
        *3 Grommet - -

    2. for TMMF Made:


      1. Pass the hood lock control cable into the engine compartment.

      2. Connect the clamps as shown in the illustration.

        A00476ME01
        Text in Illustration
        *1 Hood Lock Control Cable *2 Clamp
        *3 Grommet - -

  2. INSTALL HOOD LOCK CONTROL CABLE ASSEMBLY (for RHD)


    1. for TMC Made:


      1. Pass the hood lock control cable into the engine compartment.

      2. Connect the clamps as shown in the illustration.

        A004AT3E01
        Text in Illustration
        *1 Hood Lock Control Cable *2 Clamp
        *3 Grommet - -

    2. for TMMF Made:


      1. Pass the hood lock control cable into the engine compartment.

      2. Connect the clamps as shown in the illustration.

        A0049LFE01
        Text in Illustration
        *1 Hood Lock Control Cable *2 Clamp
        *3 Grommet - -

  3. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    1. Connect the hood lock control cable to the hood lock control lever.

    2. Engage the 3 claws and install the hood lock control lever.

  4. INSTALL HOOD LOCK ASSEMBLY


    1. A0049CP

      Apply MP grease to the sliding areas of the hood lock.

    2. Connect the hood lock control cable.

    3. Install the hood lock with the 3 bolts.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

    4. Connect the connector.

      Tech Tips

      If the hood lock assembly is equipped with engine hood courtesy switch, connect the connector.

  5. INSPECT HOOD SUB-ASSEMBLY

    Click here

  6. ADJUST HOOD SUB-ASSEMBLY

    Click here

  7. INSTALL FRONT FENDER LINER LH (for LHD)

    Click here

  8. INSTALL FRONT FENDER LINER RH (for RHD)

    Tech Tips

    Use the same procedure as for the LH side Click here.