HOOD LOCK CONTROL CABLE ASSEMBLY REMOVAL

PROCEDURE

1. REMOVE FRONT FENDER LINER LH (for LHD)

   Click here

2. REMOVE FRONT FENDER LINER RH (for RHD)

   Tech Tips

   Use the same procedures for the LH and RH side Click here.

3. REMOVE HOOD LOCK ASSEMBLY

   
   

   1. 

      Remove the 3 bolts and the hood lock.

   2. Disconnect the hood lock control cable.

   3. Disconnect the connector.

      Tech Tips

      If the hood lock assembly is equipped with engine hood courtesy switch, disconnect the connector.

4. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

   
   

   1. 

      Disengage the 3 claws and remove the hood lock control lever.

   2. Disconnect the hood lock control cable.

5. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY (for LHD)

   
   

   1. for TMC Made:

      
      

      1. Using a screwdriver with its tip wrapped in protective tape, disconnect the clamps shown in the illustration.

         

         Text in Illustration

         *1	Hood Lock Control Cable	*2	Clamp
         *3	Grommet	-	-

      2. Pull the hood lock control cable from the engine compartment and remove it.

   2. for TMMF Made:

      
      

      1. Using a screwdriver with its tip wrapped in protective tape, disconnect the clamps shown in the illustration.

         

         Text in Illustration

         *1	Hood Lock Control Cable	*2	Clamp
         *3	Grommet	-	-

      2. Pull the hood lock control cable from the engine compartment and remove it.

6. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY (for RHD)

   
   

   1. for TMC Made:

      
      

      1. Using a screwdriver with its tip wrapped in protective tape, disconnect the clamps shown in the illustration.

         

         Text in Illustration

         *1	Hood Lock Control Cable	*2	Clamp
         *3	Grommet	-	-

      2. Pull the hood lock control cable from the engine compartment and remove it.

   2. for TMMF Made:

      
      

      1. Using a screwdriver with its tip wrapped in protective tape, disconnect the clamps shown in the illustration.

         

         Text in Illustration

         *1	Hood Lock Control Cable	*2	Clamp
         *3	Grommet	-	-

      2. Pull the hood lock control cable from the engine compartment and remove it.