WINDOW DEFOGGER WIRE REPAIR

PROCEDURE


  1. IF NECESSARY, REPAIR DEFOGGER WIRE


    1. A01VK73E34
      Text in Illustration
      *1 Masking Tape
      *a Repair Point
      *b Broken Wire

      Clean the broken wire tips with grease, wax and silicone remover.

    2. Place masking tape along both sides of the wire.

    3. A01VIMG

      Thoroughly stir the repair agent (DuPont paste No. 4817 or the equivalent).

    4. Using a fine tip brush, apply a small amount of the agent to the wire.

    5. After a few minutes, remove the masking tape.

      Note

      Do not repair the defogger wire again for at least 24 hours.