BACK DOOR GLASS REMOVAL

PROCEDURE


  1. REMOVE REAR SPOILER SUB-ASSEMBLY (w/ Rear Spoiler)

    Click here

  2. REMOVE BACK DOOR TRIM BOARD

    Click here

  3. REMOVE REAR WIPER ARM HEAD CAP

    Click here

  4. REMOVE REAR WIPER ARM AND BLADE ASSEMBLY

    Click here

  5. REMOVE REAR WIPER MOTOR ASSEMBLY

    Click here

  6. REMOVE REAR WIPER MOTOR GROMMET

    Click here

  7. REMOVE NO. 2 BACK DOOR PANEL PROTECTOR

    Click here

  8. REMOVE NO. 1 BACK DOOR PANEL PROTECTOR

    Tech Tips

    Use the same procedure as for the No. 2 side.

  9. REMOVE BACK DOOR GLASS


    1. A01VJKHE01
      Text in Illustration
      *1 Protective Tape

      Apply protective tape to the outer surface of the vehicle body to prevent scratches.

    2. A01VGX8E01
      Text in Illustration
      *1 Mark

      Place matchmarks on the back door glass and vehicle body on the locations indicated in the illustration.

      Tech Tips

      Matchmarks are not necessary if the back door glass is not going to be reused.

    3. A01VESK

      Disconnect the 2 connectors.

    4. A01VEAPE01
      Text in Illustration
      *1 Piano Wire

      Pass a piano wire between the vehicle body and glass from the interior.

    5. Tie both wire ends to wooden blocks or similar objects.

    6. Cut off the adhesive by pulling the piano wire around the back door glass.

      Note

      When separating the back door glass from the vehicle, be careful not to damage the paint or interior and exterior ornaments.

    7. A01VKTE

      Using suction cups, disengage the 2 clips and remove the back door glass.

      Note

      Be careful not to drop the back door glass.

  10. REMOVE BACK WINDOW GLASS ADHESIVE DAM


    1. Using a scraper, remove the back window glass adhesive dam.

      Note


      • Be careful not to damage the back door glass.

      • Be sure to replace the back window glass adhesive dam with a new one.

  11. REMOVE BACK WINDOW GLASS CLIP LH


    1. Using a scraper, remove the back window glass clip.

      Note


      • Be careful not to damage the back door glass.

      • Be sure to replace the back window glass clip with a new one.

  12. REMOVE BACK WINDOW GLASS CLIP RH


    1. Using a scraper, remove the back window glass clip.

      Note


      • Be careful not to damage the back door glass.

      • Be sure to replace the back window glass clip with a new one.