POWER WINDOW REGULATOR MOTOR(for Front Door) INSPECTION

PROCEDURE


  1. INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Driver Side)

    Note


    • Do not apply voltage to any terminals except terminals 1 and 2, to avoid damaging the pulse sensor inside the motor.

    • Reset the power window regulator motor (initialize the pulse sensor) after installing the power window regulator motor and regulator assembly onto the door Click here.


    1. Apply battery voltage to the motor connector according to the table below.

      A01VEUZE04
      Text in Illustration
      *A for LHD *B for RHD
      *1 Motor Gear - -
      *a Counterclockwise *b Clockwise
      *c

      Component without harness connected

      (Power Window Regulator Motor (Driver Side))

      		 - -
      OK
      Switch Condition Measurement Condition Specified Condition
      Manual Operation

      Battery positive (+) → Terminal 2 (B)

      Battery negative (-) → Terminal 1 (E), 7 (DWN1)

      		 Motor gear rotates counterclockwise

      Battery positive (+) → Terminal 2 (B)

      Battery negative (-) → Terminal 1 (E), 10 (UP1)

      		 Motor gear rotates clockwise
      Auto Operation

      Battery positive (+) → Terminal 2 (B)

      Battery negative (-) → Terminal 1 (E), 4 (AUTO), 7 (DWN1)

      		 Motor gear rotates counterclockwise

      Battery positive (+) → Terminal 2 (B)

      Battery negative (-) → Terminal 1 (E), 4 (AUTO), 10 (UP1)

      		 Motor gear rotates clockwise

      If the result is not as specified, replace the power window regulator motor assembly.

  2. INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Front Passenger Side)


    1. Apply battery voltage to the motor connector according to the table below.

      A01VH7QE02
      Text in Illustration
      *A for LHD *B for RHD
      *1 Motor Gear - -
      *a Counterclockwise *b Clockwise
      *c

      Component without harness connected

      (Power Window Regulator Motor (Driver Side))

      		 - -
      OK
      Measurement Condition Specified Condition

      Battery positive (+) → 1

      Battery negative (-) → 2

      		 Motor gear rotates clockwise

      Battery positive (+) → 2

      Battery negative (-) → 1

      		 Motor gear rotates counterclockwise

      If the result is not as specified, replace the power window regulator motor assembly.